Product Description
The 30 cal 212gr BoreRider is a unique LRX product which offers an innovative design that reduces drag (increases BC), increases case capacity, and reduces bearing surface. Please pay special attention to the following details before ordering:
-
Requires a 1:8 twist or faster. Most 30 Cals are 1:10. Check what is stamped on your barrel
-
This is a "bore rider" design, and there is only a short driving band of full .3080 diameter.
-
Seat the bullet to the edge of the band. You cannot adjust OAL.
-
The bullet will protrude the shell case mouth by ~1.38"! This makes the round extremely long. Here are a few ways to feed the long cartridge in your rifle:
-
Single feed. A 2 round holder attached to your rifle may be of value.
-
Use an extended mag box
-
Load in a short action cartridge, and use a long action rifle
-
-
This is a bore rider bullet design. Only a short section of full .3080" diameter remains seated in the case neck. Forward of this, the bullet transitions to bore diameter, which aligns it precisely with the rifle bore—even before firing. This alignment reduces yaw and improves concentricity for enhanced accuracy.
Specifications
- Item #:30376
- Product Line: LRX
- Bullet Style: BT Bore Rider
- Diameter: 0.308
- Bullet Weight (Grains): 212
- Purpose: Hunting
- Pursuit: Big Game
- Box Quantity: 50
- G1 BC: 0.705
- G7 BC: 0.367
- Sectional Density: 0.319
- Length: 1.861
- Minimum Twist Rate: 8
Product Videos
Custom Field
license_required nonrestricted
